Page 1 of 2
What are these wheels?
Posted: Mon Apr 09, 2012 2:37 pm
Author: Lee McEvoy
Anyone out there able to identify these wheels please?
They came from a Z900 (according to engine and frame numbers) and are a 19 inch front and 18 inch rear. The rear is solid and the sprocket bolts straight to wheel.
I no longer need them and would like to know what they are before posting them as available in the other forums.
Cheers
Posted: Mon Apr 09, 2012 2:42 pm
Author: hillbilly
no idea what they are,but am intrested in them.
wheels
Posted: Mon Apr 09, 2012 2:49 pm
Author: andy c
Look like CMA , That have had the rough cast spokes polished.
Posted: Mon Apr 09, 2012 3:04 pm
Author: garyd
Agrred...do look like CMAs but I do remember that there was an italian coppy of CMAs......I' going to spend a week trying to think of their name now...
Posted: Mon Apr 09, 2012 4:35 pm
Author: steve.w
look like cmas but theyd be stamped if they were gen
Posted: Mon Apr 09, 2012 4:47 pm
Author: Pigford
Cambrey/Campagnolo
Posted: Mon Apr 09, 2012 5:09 pm
Author: coldsummer
I like them, whatever they are.
Posted: Mon Apr 09, 2012 8:26 pm
Author: garyd
Campagnolo
That's what I was trying to think of.
Cheers Pigford
Posted: Mon Apr 09, 2012 8:33 pm
Author: Lee McEvoy
Thanks for all your feedback, I think they may be CMA wheels, I have had a look at other web sites and they look very close.
I will probably post as CMA wheels (I think).
Posted: Mon Apr 09, 2012 9:05 pm
Author: Lee McEvoy
steve.w i can not find or see any markings on these wheels, where should I be looking? I do not want to mislead anyone in the owners club.
Posted: Mon Apr 09, 2012 9:32 pm
Author: Gus
I currently have this set up kicking around.
You can see the CMA logo in the casting of the front wheel, but there isn't anything on the back wheel.
Z 4 bolt discs fit straight on as does the rear sprocket.
It was all fitted in a Z frame.
Posted: Mon Apr 09, 2012 9:39 pm
Author: Lee McEvoy
Gus thanks for that and the photo's. Will venture out to the shed tomorrow and have a closer look on the spokes
Posted: Tue Apr 10, 2012 5:56 pm
Author: ADRIAN H
I am very interested in these if available, PM sent.
Posted: Tue Apr 10, 2012 7:04 pm
Author: Lee McEvoy
Adrian, thanks for that pm to you.
Posted: Tue Apr 10, 2012 8:05 pm
Author: neilbarrett
cmas & weigh a ton