Page 1 of 1
Posted: Tue Apr 25, 2006 3:41 pm
Author: Spud
does anybody know if a 1026 is a reconsied rebore size?
and what would the cylinder diameter be?
Posted: Tue Apr 25, 2006 8:50 pm
Author: london calling
Taking a MK1 Z1000 with a 70mm bore with gives 1015,71mm gives 1045,72mm gives 1075 i can't see how you can get 1026.
The first oversize is 0.5mm which would give 1030cc.
Posted: Tue Apr 25, 2006 9:05 pm
Author: Spud
thanks for the info
i saw it on ebay but decided that it didnt seem quite right,
just had a second look and its bin taken off!
hmmm
Posted: Tue Apr 25, 2006 9:56 pm
Author: Padders
Jack,
I sold them and they were 1030. I copied the original e bay wording and when they arrived they turned out to be high comp art pistons .5 overbore. They were bought for the Harris that I have just sold so were spare.
Spud hope this clears up the confusion.
Cheers Ian.
(Edited by PADDERS at 11:01 pm on April 25, 2006)