Page 1 of 1
Fuel Tap
Posted: Sun Apr 01, 2012 9:02 pm
Author: carpy
Hi, I was wondering what would be the correct style of fuel tap on my bike should be. It's a bitsa I'm afraid, a KZ1000 A2 with 900 barrels on it, Z1B carbs and a Z1B tank (I think). The current fuel tap has 2 outlets at 90 degrees to each other which makes connecting the fuel pipe to the left hand carbs tricky, is this right.
Many thanks
Posted: Sun Apr 01, 2012 9:21 pm
Author: 000zeds
No it is not right , both outlets should be be together
Posted: Sun Apr 01, 2012 9:37 pm
Author: z1bman
Posted: Sun Apr 01, 2012 10:19 pm
Author: sweptail
My tap has two outlets at 90 degrees. Its ok to use but, as you say, can be tricky fitting the short fuel pipe.
Posted: Sun Apr 01, 2012 10:28 pm
Author: carpy
Cheers, thanks for the replies.
Posted: Tue Apr 03, 2012 10:35 am
Author: CAT3
Not sure about other 900 & 1000 models, but the Z900 was originally fitted with a fuel tap with the two outlets at 90 degrees to each other.
Posted: Tue Apr 03, 2012 12:33 pm
Author: 750steve
CAT3 wrote:Not sure about other 900 & 1000 models, but the Z900 was originally fitted with a fuel tap with the two outlets at 90 degrees to each other.
Thats the way my 750 Twin tap is too.
Posted: Tue Apr 03, 2012 12:34 pm
Author: Bruce Sexton
My Z1A also had a fuel tap with the outlets at 90 degrees.
Bruce
Posted: Thu Apr 05, 2012 7:38 am
Author: scott
Hey Carpy.......the name ...........does it mean that you do a bit of carp fishing?
Posted: Sun Apr 08, 2012 10:58 pm
Author: carpy
Ha, sorry, old school nickname I'm afraid
