Just doing a freshen up of the the cylinder head on my A4 and while I have the head off I am going to give the bores a light hone and replace the piston rings, motor was still making good compression (I believe this will be first overhaul as the engine had only 25k on it when I imported it) but they're getting done anyway.
From experience, does anyone have any recommendations on what type or brand to get, I will be buying from the states as Prices in the UK are ridiculous, I found two types on Z1 Enterprises site.
http://www.z1enterprises.com/66mm-Kawas ... -4336.aspx
http://www.z1enterprises.com/66mm-Pisto ... 0-193.aspx
Any info appreciated, Cheers, Gavin.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
new Std. size Piston rings - Recommendations
Moderators: KeithZ1R, chrisu, paul doran, Taffus
If engine is making good compression would advise against fitting non Kwak rings just for the sake of it,25k is not high miles on these motors,just my ten pennorth..Paul J
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Who is online
Users browsing this forum: No registered users and 16 guests