Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

carb sync

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
zman
100Club
100Club
Posts: 340
Joined: 11th Jun 2011
Location: northampton[upper heyford]

carb sync

#1 PostAuthor: zman » Fri Mar 09, 2012 4:05 pm

Trying to sync my carbs after rebuilding them.\they are off the bike and useing the 3mm drill method.But i can only get three set the same.
Can someone discribe the process?
Thanks
keep thoses wheels turning
Top
kev edwards
Hardcore
Hardcore
Posts: 1487
Joined: 3rd Apr 2009
Location: leverington UK

#2 PostAuthor: kev edwards » Fri Mar 09, 2012 8:52 pm

Sounds as if you have gone to far in one direction and one of them has reached its stopping point, go in the opposite direction, when i first started playing with multi's i had a similar problem, i hope this makes sense, it does to me anyway.
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

#3 PostAuthor: DogsbolloxofZ1B » Fri Mar 09, 2012 9:33 pm

You should be using 25thou wire, 3 mm drill :cry: The notch in the slide is narrow so not sure if a 3mm dia drill bit is too wide where it comes into contact with the notch. Give me a call 07515 367071 so I can talk you through the process.

Regards,
Mike
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 24 guests