Page 1 of 1
Dimension? Centre wheel to sprocket z1000j/r
Posted: Mon Feb 20, 2012 10:49 pm
Author: brian 1100
Does anyone have an accurate dimension from the centre line of the rear wheel to the inner face of the sprocket?
It's for a Z1100R but pretty sure Z1000J/R are all the same.
Thanks
Brian
Posted: Mon Feb 20, 2012 11:15 pm
Author: Al
Will get a measure in the morning unless someone else does first.
AL
Posted: Tue Feb 21, 2012 8:56 am
Author: Al
88mm from inner face of sprocket to centre line of wheel with wheel bolted up on the bike. This is a J1 with a GPZ 1100B rear wheel which has the same dimensions here as the J wheels.
AL
Posted: Wed Feb 22, 2012 5:16 pm
Author: brian 1100
Thanks AL.
I measured it ages ago and think I got about the same.
Picked up a wider wheel so doing some experimenting to see if I can get it to fit.
Brian