Z1OwnersClub GB • Torque setting

Page 1 of 1

Torque setting

Posted: Thu Jan 19, 2012 9:58 am

Author: Harveyedward

Hello, can anybody tell me what to torque my swinging arm up to on a Z900A4.

Cheers

Posted: Thu Jan 19, 2012 10:25 am

Author: steve bowdler

If its same as Z1000 swing arm pivot bolt clymer say it is 70ft-lbs

Posted: Thu Jan 19, 2012 1:02 pm

Author: CAT3

58 - 87Lbs.ft. so the Kawasaki manual says or 79 - 118Nm.

Posted: Fri Jan 20, 2012 9:50 am

Author: Harveyedward

Thanks.