Z1OwnersClub GB

I have been trying to get an original clutch lever to replace the none original one on my GPz1100B1,i bought one of ebay nos with the part number 46092-1020 Number listed for my bike,only to find it did not fit,and no flat bit to work the clutch switch i have since looked at lots on ebay listed as for my bike but with no part to work the switch,also the one i got did not fit in the holder(to big) i just dont get it The bike is an import but iam sure parts are the same as uk,had no problem with the brake lever.But not sure if uk bike is fitted with a clutch switch As i say all the ones i have seen a photo of on ebay have no provision for this but say they are for my bike,and part number is the one in my original parts book.Anyone have any idea what the problem is Cheers Brian

Brian part number 46092-1020 is correct for a B1 for the UK and for Europe. It fits both types those with the clutch cut out switch as a seprate part and those with the cut out switch as part of the left hand housing assembly. This model does not have a flat section on the clutch lever to work the switch. Have you got the correct holder part number 13091-1046.

does it look like this. if so you have the wrong clutch lever + bracket fitted for a gpz1100 b1

http://www.ebay.co.uk/itm/Kawasaki-ZX60 ... 867wt_1082

http://www.ebay.co.uk/itm/Kawasaki-GT75 ... 907wt_1037

Cheers for the help guys,looks like the problem must be the holder.Thanks for the part number Ian.Yes z1bman the one have fitted just now looks like the ones in the the links you give me.so looks like i will be looking for a new holder. Cheers Brian

might need painting black but this is the correct lever + mount bracket

http://www.ebay.co.uk/itm/Kawasaki-Z100 ... 866wt_1037

z1bman wrote:might need painting black but this is the correct lever + mount bracket

http://www.ebay.co.uk/itm/Kawasaki-Z100 ... #ht_866wt_
1037

Cheers for that z1bman just bought it