Z1OwnersClub GB

Ok you suzuki owner yes you lol
Would you do me a favour and measure your swing arm were the wheel goes in

]<---------------------------------->[
i need you to measure the inside edge's were the rear wheel spindle goes through

Bandit 600 is 245mm but only runs a 160/60-17 on a 4.5" rim

so just wondering what the 1200 is as this use's a 180 sec tyre would look bettedr if ive got the space on my fazor mono shock arm

my fazor has got 265mm to the inner edge's of the swing arm were the wheel spindle goes through

I want to swap the rear wheel in my j3 so they match !!!

cheers boys and girls

I think the 1200 Bandit is quite narrow 220mm or summink not 100% sure tho'

I've got a Bandit 600 s/arm for sale & a complete Bandit 1200 front end - RWU - less the discs

Ive got 1200 bandit swingarm in my z1000 and it is 252mm

Pigford got a bandit 1200 front end fitted check the projects section ! And slappa thank you my man im on the look out now for a 1200 back wheel
Thanks boys x x

But Mk1 and Mk are different.

Mk1 'spokes' go straight out and Mk2 are swept.

I think that's the right way round....I'll have to have a look what I have.

I need to check out what wheels I'm using for my project....as I have a 1200 wheel with a tyre.

Mk 1 bandit 600 are sweeped mk 2 600 are straght I beleive . Didnt think the 1200 changed ??? Im after a straight spoked 5.5" rimed wheel

if u dont look too closely u cant tell the difference lol id had my turbo(bandit wheels fitted) 2 weeks before bgb told me one was curved spokes and one was straight i never noticed

yeah but were im fitting them i will know thats how it is at the moment front one is straight and rear is curved