Page 1 of 1
kz1000 a1 engine mounting bolt.
Posted: Mon Oct 10, 2011 12:23 pm
Author: stephenh
Hi all
does the kz1000 a1 have a single front engine mounting bolt,as shown in the european parts book,my bike has two shorter bolts fitted.
cheers steve.
Posted: Mon Oct 10, 2011 1:03 pm
Author: z1bman
should be a single bolt 10x310mm long
part no 92091-022
kz1000a1 engine mounting bolt
Posted: Mon Oct 10, 2011 2:00 pm
Author: stephenh
thanks for the info....i just have to find one now
cheers steve
Posted: Mon Oct 10, 2011 2:52 pm
Author: zedtwo
I might have one of the type which are threaded at both ends to allow for engine bar fitting,will let you know in the next couple of days
Posted: Mon Oct 10, 2011 6:54 pm
Author: Rob Lafferty
Steve
May have a spare set in the garage of NOS.
1 is 310mm long and the other is about 250mm.
Had them to go back to orignal and then went stainless.
Will see if i still have them if interested.
Rob
kz1000 a1 engine mounting bolt
Posted: Thu Oct 13, 2011 1:01 pm
Author: stephenh
hi Rob yes i am very interested in the bolts if you still have them
regards steve