Z1OwnersClub GB

Posted: **Thu Sep 08, 2011 4:59 pm**

Ok then inmates, I need some help with a part ID, so lets see what you got.

Here is a NOS Gen-U-Wine Z1 grip, now you will notice how the individual grippy bits are domed (have a radius) ....

So I ordered the matching version from a seller in the US, and today this arrived.....

As you can see the little grippy bits are flat, so what bike was this made for? it is not the same as the part that was advertised by the seller, as their ebay picture had the domed grip?

Posted: **Thu Sep 08, 2011 5:01 pm**

pretty sure its Z900 but I'm sure a Z900/1000 owner will confirm

Posted: **Thu Sep 08, 2011 5:09 pm**

If it doesn't have japan embossed on the end then its a pattern part.
Sadly genuine grips have recently become nla from kawasaki.

Posted: **Thu Sep 08, 2011 5:12 pm**

kas750 wrote:If it doesn't have japan embossed on the end then its a pattern part.
Sadly genuine grips have recently become nla from kawasaki.

it does have Japan embossed, and is a NOS part, but what for?

Posted: **Thu Sep 08, 2011 5:14 pm**

they look like really bad copies of z900/z1000/650/750 grips

Posted: **Thu Sep 08, 2011 5:35 pm**

Ok I found it... it is for a ...
Kawasaki NOS RH Grip G3 G4TR G5 F6 F7 F9 MC1 KV100

Posted: **Thu Sep 08, 2011 5:39 pm**

Not A1

Posted: **Thu Sep 08, 2011 11:18 pm**

Well sorted uk Kev, albeit, you did it yourself!
RegardZ.

Z1OwnersClub GB

Parts ID Help please...

Parts ID Help please...