Page 1 of 1
Z1 rear spindle arrangement
Posted: Thu Sep 08, 2011 4:51 pm
Author: uk kev
I think my rear wheel was fitted wrong by the previous owner, but just to be sure, could one of you guys with a drum brake model please post a couple of pictures showing how it should all go together please, spacers etc....
Posted: Thu Sep 08, 2011 5:32 pm
Author: chrisu
Posted: Thu Sep 08, 2011 5:39 pm
Author: uk kev
Thanks Chris, I have looked there, but just wanted to be sure that was how everyone was actually doing it?
Posted: Thu Sep 08, 2011 5:57 pm
Author: uk kev
z
Posted: Thu Sep 08, 2011 7:56 pm
Author: ac/dc
Kev
Just removed the rear wheel of my Z1a to replace the tyre
and the spacers are the same as yours
Posted: Thu Sep 08, 2011 8:00 pm
Author: ADRIAN H
Looks fine to me
Posted: Thu Sep 08, 2011 8:09 pm
Author: Padders
Looks ok to me too.
yo
Posted: Thu Sep 08, 2011 8:40 pm
Author: Hobbo
Kev
Spot on to me bud
Phil
Posted: Thu Sep 08, 2011 10:52 pm
Author: Garn 1
Kev, Looks fine ... A little hard to see on Left hand side. Maybe the internals are incorrect. Look at bad sprocket bearing, wrong double ended bering retainer, wrong distance piece or badly worn dampers if you are still in trouble.
Regardz.
