Page 1 of 1
Z750 e1 wiring help
Posted: Wed Aug 03, 2011 8:34 pm
Author: johnyt
Hi Guys
Struggling a little on my rebuild now I am upto the wiring.
On the right hand side where the timing system sits there are three wires from the unit. Does anyone know where they go to please
cheers
johnyt
Posted: Wed Aug 03, 2011 10:00 pm
Author: z1bman
what colours are the wires + do they come from the right hand side of the engine when you are sitting on it
Z750 e1 wiring help
Posted: Thu Aug 04, 2011 8:05 pm
Author: johnyt
Hi There
Yes sitting on the bike the wires come from the right hand side and the colours are, green/red, black/white, and blue/red.
many thanks
johnyt
Posted: Thu Aug 04, 2011 10:47 pm
Author: z1bman
these wires should be connected to the cdi unit which is located behind one of the side panels
Posted: Thu Aug 04, 2011 11:19 pm
Author: Z1parR
The wires should be routed under the right hand side of the engine, then run up behind the gearbox past the brake switch and behind the right side panel .
Posted: Fri Aug 05, 2011 9:09 am
Author: Crofty
One may be for oil pressure switch, located below the end of rh crankshaft below ignition pickup plate. Blue and red wiring I think.