Page 1 of 1
z1000 clock bolts
Posted: Wed Jul 06, 2011 6:32 pm
Author: slappa13
Hi Guys
Do the studs that hold clocks to yokes come out of clock mount, as one of mine is bent. thanks Neil
clock bracket
Posted: Wed Jul 06, 2011 7:14 pm
Author: DDZ900
frade not ! i have a clock bracket if you need one !
clocks
Posted: Thu Jul 07, 2011 8:11 am
Author: zseries Rob
If you took the gauge apart the stud can be removed and a new one spot welded in, I have done it where the stud was broken off.
Rob.
clock bkt
Posted: Thu Jul 07, 2011 6:29 pm
Author: DDZ900
arrr i thought you meant the alloy clocks bkt that bolts to the top yoke through rubbers!
Posted: Thu Jul 07, 2011 6:48 pm
Author: slappa13
Yes i ment clock bkt that bolts through top yoke in rubbers
clocks stud
Posted: Fri Jul 08, 2011 6:31 am
Author: DDZ900
ar well i stand my post !
Posted: Fri Jul 08, 2011 3:59 pm
Author: Rich
Cut it off flush with the bracket, drill, tap and then make a stud up the right size to fit and locktite it in.
Alternatively put the bracket in some water so the stud sticks out, heat the stud and bend it straight.
Personally I would take DDZ900 up on his offer.