Z1OwnersClub GB

Posted: **Sat Jun 18, 2011 3:49 pm**

Help! I've just completed a rebuild of a guys KZ900 and noticed something odd about how the speedo drive is located and secured. From memory there should be a couple of lugs cast into the bottom of the fork leg that locate the speedo drive i.e so it doesn't spin around the axle.
Any chance someone could check or maybe post an image?

I've also checked the Z1000-A1 I'm restoring and its the same. The speedo drive does have a lug cast into it on both KZ900 & Z1000.

Cheers,
Mike. :??

Posted: **Sat Jun 18, 2011 4:04 pm**

my A1 does not have the Lugs....the speedo drive is secured onto the spindle and the spindle is clamped into the bottom of the forks in the reqd position so wont move

Posted: **Sat Jun 18, 2011 4:56 pm**

Mark,
Thanks. It does look as though its designed to locate within something and I restored a few Z900's many years back and I was sure there was a notch but hey ho..

Cheers,
Mike

Posted: **Sat Jun 18, 2011 5:36 pm**

Mark, please remove that film clip of the cowgirl dancer - I can't stop watching it :shock:

Nice pair of boo...............ts

Posted: **Sat Jun 18, 2011 10:58 pm**

Tonka wrote:Mark, please remove that film clip of the cowgirl dancer - I can't stop watching it

Nice pair of boo...............ts

ill have to ask the wife first as she is proud of it

Z1OwnersClub GB

Z900 & Z1000 A1/A2 Speedo Drive

Z900 & Z1000 A1/A2 Speedo Drive