Page 1 of 1
My next Z1000 question
Posted: Sat Apr 21, 2007 7:41 am
Author: uk kev
under the near side, side cover (L/H) I have a pair of wires with female spade connectors and an empty rubber holder (round) wire colours are Orange & Orange/Green stripe. Now I assume (I know you should never assume) that as it is only two wires that they are for either an indicator relay, or maybe a hazzard relay? but I would appreciate someone having a look in the manual, or at their bike to confirm this please.
Posted: Sat Apr 21, 2007 8:33 am
Author: bunnysZ
is it sitting behind the fuse box, if so its most prob the indicator relay , mine has one orange wire one brown wire though, .
do you indicators not work , or come on and dont flash , or press on hazard switch and not flash.
i have a spare one in gge can send you , has been sitting around a while so not 100 % still works , or z power sell them quite cheap .
if it is that pm me your add will send it to test for you
Posted: Sat Apr 21, 2007 8:45 am
Author: uk kev
Another Job sorted
Thanks for the info and the offer, just been to my local bike parts place, which as it happens is just a short walk away from my house, and they had a pattern relay in stock,
at the price of a genuine part!
but it is now fitted, and everything now works I think.
I have also fitted my bargain e-bay seat that has no rips/splits, or tears, so it is starting to look as sharp as a very sharp thing, not restored but a decent user
Posted: Sat Apr 21, 2007 11:15 am
Author: FER
Get a genuine kawa workshop manual , they are very good and make life so much easier .
fer
Posted: Sat Apr 21, 2007 12:02 pm
Author: Padders
Kev if you still don't have a manual I have an old Haynes one you can have foc.
padders
Posted: Sat Apr 21, 2007 4:32 pm
Author: Pigford
Padders, that trumps my generous offer!
Someone ought to have one on CD so we can spread the knowledge
Fully adherent to copyright law, obviously
Posted: Sat Apr 21, 2007 5:08 pm
Author: uk kev
PADDERS wrote:Kev if you still don't have a manual I have an old Haynes one you can have foc.
padders
Thanks Ian, can I grab it at Stafford please.
The generosity from the members of this site is unbelievable.
Posted: Sat Apr 21, 2007 5:23 pm
Author: Padders
No problem Kev I'll fetch it with me on Sat. I have few odds and ends for the Z1000 so if you find anything else you need I'll have look through the garage.
Cheers padders
Definately
Posted: Sun Apr 22, 2007 2:47 pm
Author: Russ
Yes this is deffinately wiring for a hazard flash can. I've just looked on mine (canadian import) and thats wot I found. (mines got hazards) Ok