Z1OwnersClub GB

ok boys n gals i know you lot are very helpfull

recently we got my girlfreind a ke100 to do a bit of green laneing got it cheap but it needed the mains doing easy enough

any way had it all striped down everything was loose like some one had been in there sump nut was finger tight
the mains were fuu bared so i replaced them had the big end checked for up and down play all was good but i had that dought in the back of my mind
had it rebored also new small end so i would have some thing trouble free for her to ride off road
put it all back together reasonably easy
3 kicks shes running but the big end is f!"ked also guted
so left it for a couple of weeks as i was a little cheesed off got engine out striped it all out to get the crank out


now for the question


does any 1 know were i can get this rebuilt or a conrod kit put on ?
cheers
lee

Just doing the same to a ke125-sent my crank to SEP - it had seized, and they turned it round in 10 days-supplied new rod etc.

foz

how much did they charge
could you give me there details please

grampian motors in liverpool are a decent firm also.They do all sorts of two stroke cranks at a good price.

FOZ1A wrote:Just doing the same to a ke125-sent my crank to SEP - it had seized, and they turned it round in 10 days-supplied new rod etc.

foz

I've used SEP in the past too, with good results;

http://www.sep-kegworth.co.uk/

S.E.P. Kegworth - 39 Sideley Road
Kegworth, Derbyshire, DE74 2FJ
Telephone: 01509 673295
Fax: 01509 673244
Email: info@sep-kegworth.co.uk
Motor and Motorcycle Engineers
High Class Reconditioners

thanks you lot will get onto them tomorrow

Dartford rebore might be able to do it.