Can anyone recommend a good place to get some small engineering work done as part of my z650 rebuild, around the South Wales region (I live in Bridgend and work in Cardiff).
Im fitting a GPz750 swingarm in a twin shock configuration. So I need:
- The z650 swing arm pivot holes reemed out (by 1mm)
- The GPz swing arm pivot sleave shortened slightly (approx 1mm each end)
- The unitrack mounts removed from the bottom of the swing arm
- Twin shock mounts fabricated and welded on to the swing arm
Im obviously looking for somewhere tried-n-tested, that is used to working on bikes / restorations etc. and can turn their hand to the various jobs that I need done.
Thanks
Rob
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Engineering in South Wales
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Engineering in South Wales
- v70z650: [Gallery] [Project Page] -
-
steve bowdler
- Area Rep.
- Posts: 1793
- Joined: 20th Apr 2005
- Location: swansea s.wales
There is a guy lives near Port Talbot who maybe able to help I know he does a lot of work for the trike shop in cardiff(whom you could try)
http://www.trikeshop.co.uk/contact_us.htm.
I have his number in work will dig it out in the morning.
http://www.trikeshop.co.uk/contact_us.htm.
I have his number in work will dig it out in the morning.
Who is online
Users browsing this forum: No registered users and 25 guests