Z1OwnersClub GB

Posted: **Mon Apr 16, 2007 9:24 pm**

Replacing a broken clutch cable and found in amoungst a load of oil/grease a small 6mm(ish) o'ring.

Where is it from? Is it from the clutch cable housing locating/centering pin?

Posted: **Tue Apr 17, 2007 4:41 pm**

Could it be an o ring from the chain when it was fitted ?

fer

Posted: **Tue Apr 17, 2007 5:02 pm**

I found from the parts book that there is a little o'ring that goes on the centering pin as I had suspected. (pt no. 670B1507) Apparently they are there to keep grease within the clutch cable opertaing mechanism.

Z1OwnersClub GB

O'ring on Z1000A2 clutch/sprocket casing

O'ring on Z1000A2 clutch/sprocket casing