Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

O'ring on Z1000A2 clutch/sprocket casing

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Surfdeneige
Custard Cream
Custard Cream
Posts: 694
Joined: 8th May 2005
Location: Banchory (Centre of the Universe)

O'ring on Z1000A2 clutch/sprocket casing

#1 PostAuthor: Surfdeneige » Mon Apr 16, 2007 9:24 pm

Replacing a broken clutch cable and found in amoungst a load of oil/grease a small 6mm(ish) o'ring.

Where is it from? Is it from the clutch cable housing locating/centering pin?
A ken fit like!
Top
FER
Auld Heedyun
Posts: 840
Joined: 10th Jan 2002
Location: Glenfoot

#2 PostAuthor: FER » Tue Apr 17, 2007 4:41 pm

Could it be an o ring from the chain when it was fitted ?


fer
Top
User avatar
Surfdeneige
Custard Cream
Custard Cream
Posts: 694
Joined: 8th May 2005
Location: Banchory (Centre of the Universe)

#3 PostAuthor: Surfdeneige » Tue Apr 17, 2007 5:02 pm

I found from the parts book that there is a little o'ring that goes on the centering pin as I had suspected. (pt no. 670B1507) Apparently they are there to keep grease within the clutch cable opertaing mechanism.
A ken fit like!
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 14 guests