Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

rear shocks

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
knut
100Club
100Club
Posts: 427
Joined: 24th Jun 2007
Location: cork,Ireland

rear shocks

#1 PostAuthor: knut » Fri Dec 11, 2009 11:15 pm

hi,how easy is it to strip the standard shocks?
is a matter of drifting out the pin just underneath the top mounting?
the springs are looking a bit rusty and need to clean them up a bit.
thanks mick
what,s there to say except we,re all mad on here.
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#2 PostAuthor: mick znone » Fri Dec 11, 2009 11:42 pm

there is a tool that can be made to assist in doing this job, someone on here made one. might find it with a search.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#3 PostAuthor: Garn 1 » Sat Dec 12, 2009 6:48 am

Knut, briefly, you have to knock out that pin, compress the spring, and undo a large slim lock-nut under the shroud. Not easy without a compressing jig.

Regardz.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#4 PostAuthor: mick znone » Sat Dec 12, 2009 7:50 am

someone on here made a jig with two bits of wood with a hole drilled to fit over the shroud and 4 long bolts to wind the spring down. try putting up a jig question , it really was ingenious.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
phil churchett
Hardcore
Hardcore
Posts: 3009
Joined: 28th Mar 2003
Location: Warwickshire

#5 PostAuthor: phil churchett » Sat Dec 12, 2009 8:26 am

mick z1a wrote:someone on here made a jig with two bits of wood with a hole drilled to fit over the shroud and 4 long bolts to wind the spring down. try putting up a jig question , it really was ingenious.


Mick, i think it was Chris, [MaineKZ]
Four pipes rule, anything else is second best.
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#6 PostAuthor: tlc » Sat Dec 12, 2009 8:35 am

http://z1ownersclub.co.uk/forum/viewtop ... c&start=30

There you go.
Asphalt Cowboy

Phil Churchett award winner 2015
Top
phil churchett
Hardcore
Hardcore
Posts: 3009
Joined: 28th Mar 2003
Location: Warwickshire

#7 PostAuthor: phil churchett » Sat Dec 12, 2009 10:09 am

tailiftchris wrote:http://z1ownersclub.co.uk/forum/viewtopic.php?t=6812&postdays=0&postorder=asc&start=30

There you go.


Cheers Chris.
Four pipes rule, anything else is second best.
Top
User avatar
knut
100Club
100Club
Posts: 427
Joined: 24th Jun 2007
Location: cork,Ireland

#8 PostAuthor: knut » Mon Dec 14, 2009 3:26 pm

thanks guys, diy spring compressor about to be made :wink: :up
what,s there to say except we,re all mad on here.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 19 guests