Page 1 of 1
Z900 grab rail will it fit the Z1R
Posted: Sat Apr 07, 2007 9:44 pm
Author: Padders
Has anyone tried to fit a Z900 grab rail to a Z1R.
cheers padders
Posted: Sun Apr 08, 2007 12:07 am
Author: Jeff Saunders
The mounting points will fit - not sure about the clearance over the seat/tail area.
The Z1R grab handles fit on the Z1/Kz900's.
Posted: Sun Apr 08, 2007 8:05 am
Author: bunnysZ
i think z900ltd grabrail is higher over the tail so if you have a prob with yours one of those might fit.
i have the ltd rail on my bike and it is higher than others.
Posted: Sun Apr 08, 2007 9:19 am
Author: Padders
Cheers Guys think I'll have a go with the Ltd one then.
padders
Posted: Sun Apr 08, 2007 12:19 pm
Author: stale
Padders,
This is a specially made grab rail for the Z1R. I think some german guy made it. I think (not sure) the bike owner has the contact info. If you want me to, I'll find out.
Posted: Sun Apr 08, 2007 1:13 pm
Author: Padders
Yes please Stale if you could. Just about to go for a spin with the missis on the back and would feel better if she had a grab rail. Joanne is fine for normal riding but if I had to make an emergency stop she has nothing to brace herself with.
Cheers padders
Posted: Sun Apr 08, 2007 1:26 pm
Author: stale
I've emailed the bike owner, Padders. I'll post when I get a reply. Cheers
St?le
Posted: Mon Apr 09, 2007 7:18 pm
Author: stale
Padders,
Got a reply. The guy is apparantly danish. He just made two grab rails for the Z1-R, but was talking about making more to sell. Contact him through his site
http://www.z-kawa.dk/
Good luck ! Please keep us updated.
Cheers
St?le
Posted: Mon Apr 09, 2007 8:27 pm
Author: Padders
Thanks Stale