Page 1 of 1
kickstart spline
Posted: Wed Oct 28, 2009 6:39 pm
Author: paulmceleney
I would like to remove my kickstart spline from 1978 z1000 a2 do i need to take the engine out, or could i remove the sum with the engine still in the frame and remove it this way. Also what would i need to do to remove it is it a easy job i want to fit a ape blank off plate
Posted: Wed Oct 28, 2009 7:03 pm
Author: chrisu
sorry paul - you need to split the engine..........
Posted: Wed Oct 28, 2009 7:22 pm
Author: Pigford
Have a look at
BRIAN450's project - he had the same thing
Posted: Wed Oct 28, 2009 7:22 pm
Author: Ginger Bear
It is possible to get a rubber blanking cap to cover the spline, I have just trawled ebay, but can't find any at the moment.
They do make a naked spline look a little tidier.
With a bit of luck someone here will point you in the right direction.
Posted: Wed Oct 28, 2009 8:09 pm
Author: 000zeds
Phone Z-Power 01942 262864 as they don`t list everything on web.
Posted: Thu Oct 29, 2009 4:51 pm
Author: paulmceleney
Thanks for everyones help ive decided to split the engine just order a blank off plate from debben performance steve was very helpful with the question that i asked