Page 1 of 1
mystery can on engine
Posted: Sun Oct 18, 2009 10:18 am
Author: 02GF74
what is this cap for?
and if I should ever remove it, what can I expect to find inside - a spring pinging out?
circled in photo below.
Posted: Sun Oct 18, 2009 10:22 am
Author: Pigford
Its the "blank plug" for the oil gallery - if you take it off, all you'll get is a facefull of 10/40w
Always fit a pressure gauge on the end
Posted: Sun Oct 18, 2009 10:36 am
Author: Garn 1
Pigford, you could be slightly mis-informing our friend, by ... "Always fit a pressure gauge on the end". It should be explained that, you don't have to fit a gauge on the end! However, if you want to to test the oil pressure you may use this point to connect. Also, some guys use this point as one of the points to connect to an oil-cooler. Agree that you could get a face full of oil!
RegardZ ~ Garn
Posted: Sun Oct 18, 2009 10:52 am
Author: mick znone
sometimes fit pressure gauge
Posted: Sun Oct 18, 2009 10:54 am
Author: mick znone
Posted: Sun Oct 18, 2009 12:23 pm
Author: Pigford
Sorry... I meant "You could always fit ... blah, blah...."
Anuvver "written" problem with posting things on these blinkin' computors
Posted: Sun Oct 18, 2009 4:17 pm
Author: mick znone
now o2 thinks he could fit a blah blah
Posted: Sun Oct 18, 2009 4:25 pm
Author: hillbilly
is that a little sheep
Posted: Sun Oct 18, 2009 5:46 pm
Author: Pigford
Posted: Sun Oct 18, 2009 9:35 pm
Author: mick znone
now he's going to be riding around with a blummin sheep attached to his bike, a guy cant get sound advice on here these days
Posted: Mon Oct 19, 2009 8:11 pm
Author: paul doran
