Page 1 of 1
billet engine mounts
Posted: Sun Oct 04, 2009 5:02 pm
Author: brian 450
If i make some 10mm billet engine mounts where can i get some longer engine bolts?
Posted: Sun Oct 04, 2009 5:21 pm
Author: GUYZED
Brian try this person one ebay - they sell s/s bolts etc,
tigafi01 (sellers name)
Tina G Finch
28 Spenlow Drive
Waldersade Woods
Chatham
Kent
ME5 9JT
01634 685989
Made my engine bolts to the length i wanted in s/s steel.
Posted: Sun Oct 04, 2009 5:35 pm
Author: brian 450
Thanks Guy.
Posted: Sun Oct 04, 2009 6:50 pm
Author: BShaw
I recognise that address, bound to get good discount as an ex club member, not Tina but Paul
I owe you a drawing Brian don't I... Sorry mate I forgot... will do it this week.
Posted: Sun Oct 04, 2009 9:00 pm
Author: KWACKERZ1
Brian,
Phil Denton engineering could probably do you stainless ones made to teh length you want.
I know this is cheeky but,
If you are getting some 10mm engine plates made up, would you consider knocking up an additional set for me?
If you would let me know, as I was looking at the pmc ones and boy are they overpriced.
Cheers
Phil
Posted: Mon Oct 05, 2009 9:07 am
Author: brian 450
No prob mate. Let me get my ones done first then you can have a look at them to see what you think then we can go from there. Brian.
Posted: Tue Oct 06, 2009 11:15 am
Author: KWACKERZ1
Great that would be good drop me a pm when you have them done.
Cheers
Phil
Posted: Tue Oct 06, 2009 11:45 am
Author: Gus
Brian can we see the finished Items as I might be up for some sets if that's OK