Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Electrickery

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
bollypne
100Club
100Club
Posts: 259
Joined: 9th Feb 2007
Location: Leyland, Lancs
Contact:
Contact bollypne

Electrickery

#1 PostAuthor: bollypne » Mon Sep 21, 2009 12:09 pm

Hi all.

Interesting problem, when on Dip beam my indicators only work when engine running above 3k revs and then only slowly. Work ok on side light.

When on Full beam indicators work fine. Hmmm!

God i hate electrics, anything more than a household plug and i'm stressed. LOL

Rgds
Colm
Big Bol
Z900, ZRX1200r, GPz550, Deauville, 250LC, CB900FA, XT350, XS400, XJ6s, 2 ex-wives and a new wife ;-)
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#2 PostAuthor: PAULJAC47 » Mon Sep 21, 2009 5:26 pm

Sounds like a poor earth to me,check batt volts also 1,2 volts per cell,make sure all lamps same wattage, cheers Paul j..
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#3 PostAuthor: tlc » Mon Sep 21, 2009 5:32 pm

Dip beam is drawing too much current.

Maybe a resistance problem with the dip circuit ?

Do a resistance test through the circuit. Might find corrosion in the dip switch ?
Asphalt Cowboy

Phil Churchett award winner 2015
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 21 guests