Page 1 of 1
Smokin on over run
Posted: Wed Aug 19, 2009 10:50 am
Author: Z1000ELR
The beast is smokin a bit on over run. Im told its the valve seals that need replacing. How easy is this or would i be better off getting it done?
Thanks
Si
Posted: Wed Aug 19, 2009 1:31 pm
Author: BShaw
Probobly valve guides, you can DIY,(I have) but depends on your spannering ability, you need an oven big enough for your head, a drift and a reamer. Either way it's a head off job.
Posted: Wed Aug 19, 2009 3:14 pm
Author: Z1000ELR
OK Thanks
Posted: Wed Aug 19, 2009 3:47 pm
Author: BShaw
If you are going to do it give me a bell my number is in the mag.
Posted: Wed Aug 19, 2009 4:32 pm
Author: Z1000ELR
Will do Baza
Thanks
Si
Posted: Wed Aug 19, 2009 10:15 pm
Author: GEZ635
You should also re-cut the valve seats if changing the guides.
Gez