Page 1 of 1
Kick Start
Posted: Wed Aug 05, 2009 4:57 pm
Author: Z1000ELR
Im thinking of removing the kick start & blanking off. How hard is it to remove the shaft?
Thanks
Si
Posted: Wed Aug 05, 2009 5:05 pm
Author: Steve R
To remove the shaft you need to split the cases, major job, pmc do a cover for the shaft that looks quite tidy.
.
https://www.z-power.co.uk/merchantmanag ... php?pId=88
see 14th oct entry on above.
Or you will find, if my memory serves me right from 25 years ago, the top of a bottle of brut will go over the shaft held on with a large dob of blue tac.
Posted: Wed Aug 05, 2009 7:52 pm
Author: Z1000ELR
OK mate thanks. Ill dig me Brut out!!
kick cover
Posted: Wed Aug 05, 2009 7:58 pm
Author: AL MARSHALL
i have the bottom end of a z1000st,you are welcome to the cover/blank from that foc.
Posted: Thu Aug 06, 2009 6:37 am
Author: Ginger Bear
I got this from ebay, works really well.
Maybe worth contacting the seller to see if more are available.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0142308122
Posted: Thu Aug 06, 2009 6:40 am
Author: Ginger Bear
Better still,
Google this part No. 92074-037
There are loads that come up
