Z1OwnersClub GB

Posted: **Tue Jun 23, 2009 9:37 am**

Has anyone ever fitted a Z Butt seat unit to their Z1, I have been trying to find a picture but have had no luck so far.

Thanks for any help

Posted: **Tue Jun 23, 2009 10:09 am**

Got one on my Drouin project. It's a Z9/1000 unit. They also do Z650 style. Costs around Â£140 with the seat pad. Look at my supercharged Z1000 in projects for more pics at different angles.

Posted: **Tue Jun 23, 2009 10:37 am**

zed1015 wrote:Got one on my Drouin project. It's a Z9/1000 unit. They also do Z650 style. Costs around Â£140 with the seat pad. Look at my supercharged Z1000 in projects for more pics at different angles.

Thanks, where did you buy that one from. The one I am looking at is from NPS Plastics in Blackpool. They sent me the dimensions and the total length was 750mm, yours looks longer and better.

Martin

Posted: **Tue Jun 23, 2009 11:31 am**

Quote........... yours looks longer and better. I say

Posted: **Tue Jun 23, 2009 11:34 am**

steve bowdler wrote:Quote........... yours looks longer and better. I say

Damn, I didn't mean to be so obvious :oops:

Posted: **Tue Jun 23, 2009 11:46 am**

steve bowdler wrote:Quote........... yours looks longer and better. I say

No comment :shock:

.

Got mine from UNATEC 01903 501060. These people do the original Z -BUTT and advertise in Streetfighters Mag..

Posted: **Tue Jun 23, 2009 11:57 am**

P.S. Just been out and measured mine and it's also 750mm.

Posted: **Tue Jun 23, 2009 11:58 am**

Got mine from UNATEC 01903 501060. These people do the original Z -BUTT and advertise in Streetfighters Mag.

Thanks I will check them out. And to fend off more comments, this is the last time I will praise your "Butt"

Posted: **Tue Jun 23, 2009 12:04 pm**

zed1015 wrote:P.S. Just been out and measured mine and it's also 750mm.

Cheers, I was worried that the one I was looking at would not cover the back of the frame enough to put a light unit in, I see from your project posting this is possible and it looks good.

Thanks again

Posted: **Tue Jun 23, 2009 12:33 pm**

The one I saw from NPS Plastics is Â£50 plus Â£10 delivery, they also do Z1 tailpieces for Â£30 plus delivery. 07818 811533

Posted: **Tue Jun 23, 2009 4:37 pm**

weahay, whats bean going on here then, been at work, missed all the measuring action :lol:

should this not be back doored

Posted: **Tue Jun 23, 2009 5:30 pm**

durhamz1b wrote:The one I saw from NPS Plastics is Â£50 plus Â£10 delivery, they also do Z1 tailpieces for Â£30 plus delivery. 07818 811533

BUGGER

. That looks exactly the same as mine from UNATEC. So if i were you i'd buy from NPS. Just looked at my build expense log and i paid Â£145 with the seat pad included, so maybe NPS are 25/30 quid cheaper for the unit on its own. Think i know where i'm buying my next one from.

Posted: **Tue Jun 23, 2009 5:43 pm**

zed1015 wrote:
durhamz1b wrote:The one I saw from NPS Plastics is Â£50 plus Â£10 delivery, they also do Z1 tailpieces for Â£30 plus delivery. 07818 811533

BUGGER . That looks exactly the same as mine from UNATEC. So if i were you i'd buy from NPS. Just looked at my build expense log and i paid Â£145 with the seat pad included, so maybe NPS are 25/30 quid cheaper for the unit on its own. Think i know where i'm buying my next one from.

It could be that the one you have is far better quality. I will probably find out soon. I am going to take a run through to ZPower in a week or two and that company not much further away.

And Mick, I will try to use the front door :roll:

http://www.npsplastics.co.uk/seatunitsgallery.html

Z1OwnersClub GB

Seat units (Z Butt)

Seat units (Z Butt)