wow, sounds like a quite a few options... thanks a mill everyone. I'll start slow and easy ' like you say, plenty of time as the carbs are off
cheers
Dave
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
front caliper bleed nipple sheared.
Moderators: KeithZ1R, chrisu, paul doran, Taffus
If the nipple has sheared off flush with the machined face of the caliper you can weld a nut onto the end of it. An 8mm nut will have an internal diameter sufficiently big enough to mig-weld straight through the middle and when its still at red heat and after maybe a half a minute or so put a spanner on and turn it slowly. Not too hot and not too soon but the heat transfer will aid removal.
AL
AL
Who is online
Users browsing this forum: No registered users and 21 guests