Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

block thread gone

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

block thread gone

#1 PostAuthor: mick znone » Sun Jul 12, 2009 8:19 am

while im putting a new gasket in, i think i will helicoil this thread. the cover is held down with 16 bollts, the rear outside one has been drilled out through the head, a bolt goes through and a nut goes on the end. i believe this can be done in situ, with the tank off, AM I RIGHT GUYS :? its the left hand outside rear thread on the head. the relay guy said it can be done in situ.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
Steve Cooke
Hardcore
Hardcore
Posts: 1612
Joined: 18th Mar 2007
Location: Southampton

#2 PostAuthor: Steve Cooke » Sun Jul 12, 2009 8:23 am

No problem in doing that , if you don,t have an M6 Helicoil set I can lend you one with the appropriate Helicoil if you want.
Top
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:
Contact Ginger Bear

#3 PostAuthor: Ginger Bear » Sun Jul 12, 2009 8:46 am

Mick, just be careful you don't get swarf in & around the cam buckets etc.
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#4 PostAuthor: mick znone » Sun Jul 12, 2009 8:50 am

great, so it can be done guys. thanks for the offer of the set Steve, but i think i will get someone to do it, im happier fixing houses these days.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
wilsonsjw11
Hardcore
Hardcore
Posts: 1317
Joined: 18th Jul 2008
Location: West Sussex/Central London

#5 PostAuthor: wilsonsjw11 » Sun Jul 12, 2009 9:05 am

Mick.
Glad to hear you meant cam cover gasket.
If you want one PM me your address and I'll send you a new one.
I can send you the M6 Helicoil kit along with the 6,3mm drill bit,it comes with full instructions and really is a piece of piss to fit,simple.
Let me know.
Regards
Steve
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 14 guests