Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
getting there but need some advice on A2 petrol tap...
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
mikeyboy1966
getting there but need some advice on A2 petrol tap...
...almost at the final hurdle of getting the bike on the road - I put an A2 tank (with petrol tap) onto a B3 Ltd. There's a vacuum pipe from the A2 tap - anyone any ideas where it goes? The bike's running sweet as a nut under 4000 revs after I balanced the carbs but doesn't want to rev any higher, Cheers Mikeyboy
vacuum pipe
Mikeyboy,
On my A2 the vacuum tap take off that you mention goes via a smaller platic tube than the fuel feeds and is connetced to a small stub on the left side of carb no 3 above the floatbowl.
If you don't have that same take off-i wonder if connecting it to the vcuum take off on any of the cylinders would be ok?????????
Regards
Reecy
On my A2 the vacuum tap take off that you mention goes via a smaller platic tube than the fuel feeds and is connetced to a small stub on the left side of carb no 3 above the floatbowl.
If you don't have that same take off-i wonder if connecting it to the vcuum take off on any of the cylinders would be ok?????????
Regards
Reecy
Who is online
Users browsing this forum: No registered users and 22 guests