I would like to check the balance on my CR carbs, but can't seem to find anywhere to put the balance pipes. I have checked the Keihin website and have had no joy. Can any one help.
Cheers Rob
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Keihin carbs balancing
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Keihin carbs balancing
Z1000R/ZRX, RD 125LC, Zx7r , Endurance racer
-
ade woollams
- Custard Cream
- Posts: 505
- Joined: 5th Mar 2007
- Location: within the smoke n the burnout zone
im guessing you are using J model rubbers with no pickup point so you may have to drill and tap the front tubes on the carbs and screw adaptors in and after put blank off screw in there.
dragracing, because it takes more than one ball !!!!!!!!!!!!!!!
http://www.youtube.com/watch?v=pNoktjNP ... ture=share
http://www.youtube.com/watch?v=pNoktjNP ... ture=share
The CRs seem to use different screw in adaptors depending on what bike they're supplied for - I was delighted to find that the ones I got off Zed Power come with adaptors that fit into the standard Z1000 A1 rubbers neatly avoiding this dilemma 
I had assumed I would have had to use the J rubbers and follow the path Ade has suggested.
I had assumed I would have had to use the J rubbers and follow the path Ade has suggested.Who is online
Users browsing this forum: No registered users and 23 guests