Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Desperate to identify these !!!

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Z1B Alan
100Club
100Club
Posts: 250
Joined: 14th Nov 2006
Location: ellesmere port

Desperate to identify these !!!

#1 PostAuthor: Z1B Alan » Sun Apr 12, 2009 6:16 pm

I am still desperate to identify which carbs are fitted to my bike, kindly view the photos and suggest which model they are from. Currently running 115 mains and 15 pilot jets my problem is they don't seem to match any listed in the Clymer manual with the current jetting.

Image

Image

Image

Hope the photo of the tickover adjusment helps with identifing which carbs these are that are fitted to my bike.
I would also once identification has been made need advice on correct jetting when fitted to a standard Z1B
They run, They break , You spend and so it goes on
Top
User avatar
PJ
Hardcore
Hardcore
Posts: 3538
Joined: 2nd Dec 2008
Location: Halesowen, West Mids

#2 PostAuthor: PJ » Sun Apr 12, 2009 6:30 pm

They look like 26mm z1000 carbs - but the tickover adj on the bottom?
WHO NEEDS DRUGS - WHEN YOU HAVE A ZED!!
Top
User avatar
mikey
Hardcore
Hardcore
Posts: 3792
Joined: 29th Nov 2005
Location: bristol

#3 PostAuthor: mikey » Sun Apr 12, 2009 6:32 pm

Im most probably wrong but with tickover adjuster on the bottom they look like the carbs that were on my GS1000
Making the world a shiny place with a factory finish
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#4 PostAuthor: tlc » Sun Apr 12, 2009 6:34 pm

Airscrew on the side. Z900A4 ?
Asphalt Cowboy

Phil Churchett award winner 2015
Top
User avatar
foreverinthegarage
Regular Poster
Posts: 64
Joined: 2nd Jan 2008
Location: Grimsby

#5 PostAuthor: foreverinthegarage » Sun Apr 12, 2009 6:35 pm

Z1R has the tickover adjuster on the bottom
Z1000 The King Is Still Alive.
Top
User avatar
zedrider
100Club
100Club
Posts: 256
Joined: 24th Aug 2008
Location: southwales

Re: Desperate to identify these !!!

#6 PostAuthor: zedrider » Sun Apr 12, 2009 6:36 pm

Z1B Alan wrote:I am still desperate to identify which carbs are fitted to my bike, kindly view the photos and suggest which model they are from. Currently running 115 mains and 15 pilot jets my problem is they don't seem to match any listed in the Clymer manual with the current jetting.

Image

Image

Image

Hope the photo of the tickover adjusment helps with identifing which carbs these are that are fitted to my bike.
I would also once identification has been made need advice on correct jetting when fitted to a standard Z1B



try Nrp www.nrp-carbs.com
zed
Top
User avatar
ted1r
Area Rep.
Area Rep.
Posts: 2907
Joined: 29th May 2008
Location: Cleethorpes Lincolnshire

post

#7 PostAuthor: ted1r » Sun Apr 12, 2009 6:36 pm

Sticking me neck out 28mm Z1r
"Work this is why I did it"

"I've had more minutes than I have left"

Z1R D1
Granada
vantastic Transit........
KLE650
Top
User avatar
000zeds
ZedHead
ZedHead
Posts: 1129
Joined: 30th Dec 2005
Location: Kent

#8 PostAuthor: 000zeds » Sun Apr 12, 2009 6:37 pm

Possibly from a Z1000 MK11
Zeds-R-Us
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#9 PostAuthor: PAULJAC47 » Sun Apr 12, 2009 6:37 pm

Look like the carbs fitted to early Suzuki gs850/1000 will work fine if you are not bothered with original fitment Cheers Paulj....
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
User avatar
chrisu
Moderator
Posts: 4367
Joined: 3rd Sep 2005
Location: herts

#10 PostAuthor: chrisu » Sun Apr 12, 2009 6:38 pm

agree - Z1R carbs
Top
sweptail
100Club
100Club
Posts: 391
Joined: 26th Oct 2007
Location: liverpool

#11 PostAuthor: sweptail » Sun Apr 12, 2009 6:39 pm

26mm z1000a1 me thinks. Z1b usually runs 28mm. :)
Top
User avatar
ted1r
Area Rep.
Area Rep.
Posts: 2907
Joined: 29th May 2008
Location: Cleethorpes Lincolnshire

post

#12 PostAuthor: ted1r » Sun Apr 12, 2009 6:41 pm

WHOOOO got sumfink right

Ted
:D
"Work this is why I did it"



"I've had more minutes than I have left"



Z1R D1

Granada

vantastic Transit........

KLE650
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#13 PostAuthor: PAULJAC47 » Sun Apr 12, 2009 6:43 pm

Just looked in Gs1000 manual these carbs are the same as fitted with adjuster underneath!!!
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."

-Han Solo



You can't polish a turd, but you can roll it in glitter



Salad is what real food eats.

Anon



PUM 673
Top
User avatar
hillbilly
Hardcore
Hardcore
Posts: 2337
Joined: 31st Jan 2008
Location: lancashire

#14 PostAuthor: hillbilly » Sun Apr 12, 2009 7:11 pm

i have a set like that,and they are off a gs1000.hope it helps.
push me shuv you.sez who sez me.
owing p.u.m. (76 z1b)(v reg z1r)
Top
zeroed

#15 PostAuthor: zeroed » Sun Apr 12, 2009 8:57 pm

look the same as ones on my Z1000a1 26mm(maybe 28mm?) tho that`s an educated guess, i`m no expert
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 20 guests