Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Fork identification ?

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
sparky650

Fork identification ?

#1 PostAuthor: sparky650 » Tue Mar 17, 2009 10:36 am

Hello all, ill be needing to replace my fork seals on my z650 but i was told the forks on mine were changed to z750's ? Ive been looking at z750 forks and they dont seem to look like the ones ive got on mine. They look more like GPZ forks ?

Any ideas as to what bike they are from ?
Cheers.
Image
Top
User avatar
Mark Stratton
Custard Cream
Custard Cream
Posts: 574
Joined: 16th Feb 2009
Location: Southampton

Fork identification

#2 PostAuthor: Mark Stratton » Tue Mar 17, 2009 11:46 am

Sparky

the forks look definitly like GPZ because of the anti dive units however I'm not sure that these are 750 because the the type of spindle. I have a set of GPZ750A1 forks and the spindle is not like that one. Perhaps they could be GPZ550.
Top
sparky650

#3 PostAuthor: sparky650 » Tue Mar 17, 2009 11:06 pm

Cheers mark, all i really need to know is what size fork seals to order and what grade of oil i should use :?? Its a bit baffling , ive got some 43mm fork seals for a z750 cos i was told thats what they were of but as i suspected these are not z750 forks :(
Top
sparky650

#4 PostAuthor: sparky650 » Wed Mar 18, 2009 5:44 pm

All sorted :roll: i took the bike down to the kwak shop and there nearly 100 % sure they are off a gpz550 although they did say that all the gpz550 forks were originaly black and these do look like they have been polished .

Cheers.
Top
sparky650

#5 PostAuthor: sparky650 » Sun Mar 22, 2009 9:05 am

Bad news :cry: ..i was told wrong by mr kawasaki !!! These forks are off a gpz750 not a gpz 550 !

Now all i need is the correct cc's to put into each fork leg ? Could anyone help on this or should i risk going to mr kawasaki again :roll:

Any help appreciated :wink:
Top
User avatar
Mark Stratton
Custard Cream
Custard Cream
Posts: 574
Joined: 16th Feb 2009
Location: Southampton

#6 PostAuthor: Mark Stratton » Sun Mar 22, 2009 1:44 pm

Sparky

According to my genuine Kawasaki manual the GPZ750a1 takes 248.5ml of SAE10W oil. Oil level 185mm (compressed).
If you need any further info I could probably scan the manual and send via e-mail.

Mark
Top
sparky650

#7 PostAuthor: sparky650 » Sun Mar 22, 2009 8:38 pm

Cheers mark, thats the info i needed :wink:
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests