Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

CAM END CAPS/CLEANING UP HEAD EXTERNALLY

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

CAM END CAPS/CLEANING UP HEAD EXTERNALLY

#1 PostAuthor: PAULJAC47 » Thu Dec 11, 2008 6:11 pm

Hi All,Just got my Z1b head back from engine shop they have made a good job of the valve guides and the couple of threads that had been butchered sometime in the bikes past.Trouble is they have lost one of the valve end caps, looked on Z power and you can get these as single items but do you need Kawabond to re fix or will any gasket sealant suffice? also fins on head are still quite dirty anyone know of good way of cleaning into fins instead of going to trouble of vapour blasting.if i did this i reckon it would show up barrels.Thanks in anticipation PaulJ....
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#2 PostAuthor: tlc » Thu Dec 11, 2008 6:15 pm

Just done mine and they were previously done with Hermetite brown.

I`ve redone them with RTV silicon.

I`ll be interested to hear other opinions also !
Asphalt Cowboy

Phil Churchett award winner 2015
Top
User avatar
chrisu
Moderator
Posts: 4367
Joined: 3rd Sep 2005
Location: herts

#3 PostAuthor: chrisu » Thu Dec 11, 2008 7:32 pm

a light smear of black silicone sealer onto very clean oil free surfaces.
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#4 PostAuthor: Pigford » Thu Dec 11, 2008 7:51 pm

Also.... let the silicon part-set so it holds the 'slippy' buggers in place whilst you tighten the cam cover :wink:
And on the 7th day... Zeds were created!
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#5 PostAuthor: tlc » Thu Dec 11, 2008 8:56 pm

Done it right then :D

Brake cleaner is wonderful stuff :!: I get through gallons of it :wacko
Asphalt Cowboy



Phil Churchett award winner 2015
Top
User avatar
chrisu
Moderator
Posts: 4367
Joined: 3rd Sep 2005
Location: herts

#6 PostAuthor: chrisu » Thu Dec 11, 2008 10:33 pm

you're not supposed to drink it........
Top
rafstopcarryon
100Club
100Club
Posts: 374
Joined: 5th May 2007
Location: clevelandsestershershire

#7 PostAuthor: rafstopcarryon » Fri Dec 12, 2008 11:37 am

just found a place in yorkshire for vapour blasting .......cheap as chips !!!!!!!

cases £50
head £35
blocks £30
all three £95 les wylde, bestspoke,01423 359998 (collection/delivery service available?)
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

#8 PostAuthor: RALPHARAMA » Mon Dec 15, 2008 11:02 pm

I used silver RTV on mine and they're hunky dory :D
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 20 guests