Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

carb float heights - Help needed on how to check the heights

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
crossy2425

#1 PostAuthor: crossy2425 » Thu May 04, 2006 10:32 pm

Hi,
Please could someone describe the best/easiest way to check the float heights on a Z650?
Slide carbs. Manual says 30mm. Where is this measurment taken from?

Many thanks.

(Edited by crossy2425 at 11:33 pm on May 4, 2006)
Top
User avatar
chrisNI
Site Admin
Posts: 2316
Joined: 22nd Dec 2001
Location: NI

#2 PostAuthor: chrisNI » Fri May 05, 2006 6:16 pm

If the set-up's the same as the other Zeds the best way to do the float levels is to get a tool made up like the one in the manual with a tube that screws into the bottom of the float bowls. You can then measure off a point on the carb.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 7 guests