thanks for any help.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
clutch side sprocket casing
Moderators: KeithZ1R, chrisu, paul doran, Taffus
clutch side sprocket casing
Hi lads, My gear change shaft is sloppy in the outer casing. I have removed this to look at. Is there a bushing that can be replaced or is it the casing that wears. I'm not sure as I cant see one. (the thread has also gone in the clutch cable and will require helicoiling)
thanks for any help.
thanks for any help.
-
london calling
- Hardcore
- Posts: 3992
- Joined: 16th Apr 2004
- Location: Loughborough, East Midlands
-
RALPHARAMA
- Area Rep.
- Posts: 3407
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
If memory serves me right the shaft is supported by the aluminium casting. But there is no reason why this couldn't be carefully opened up and have a phosphor bronze bush fitted, though you would need it done by someone who is a reasonable engineer.
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Who is online
Users browsing this forum: No registered users and 18 guests