hi guys got set of dyna coils on my zed just wondering the best way to mount them on the frame as sing stanard spacers one of them fouls the tank and thebody of the coils seem very close to them frames rail to any guys got a pic of how they mounted them
cheers
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
dyna coils
Moderators: KeithZ1R, chrisu, paul doran, Taffus
dyna coils
Z1100R /,,,,,,,SOLD IT /// Z1B REP ZEPHYR SOLD THAT NOW TOO /////////
AND A Z1000H IN TINY PEICES ALL OVER MY WORKSHOP NOW
AND A Z1000H IN TINY PEICES ALL OVER MY WORKSHOP NOW
Ninjabob, as you can see, its common practice to insulate the space post next to the low tesion connections of the coils...
My old Gixxer caught me out once, when I put Dyna's on it and the post was very close to the contacts and when the bike warmed up it all must have expanded a bit & caused a short..... and as it was usually after a mile or 2, a long push home
Took me a while to suss out

My old Gixxer caught me out once, when I put Dyna's on it and the post was very close to the contacts and when the bike warmed up it all must have expanded a bit & caused a short..... and as it was usually after a mile or 2, a long push home

Took me a while to suss out

And on the 7th day... Zeds were created!
Who is online
Users browsing this forum: No registered users and 15 guests