Can anybody help?
I was told in a previous post that a zx6 wheel would fit my gpz1100b1 forks,are the zx7-zx9 front wheels basicaly the same?
I'm in the process of fitting a zx9r swingarm with a zx7r 5.5 rear wheel into the frame and would like the front to match.
If I have to change the forks and yokes I will, unfortunatly a lack of the folding stuff means looking at all the options.
Regards Col
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
front wheel
Moderators: KeithZ1R, chrisu, paul doran, Taffus
front wheel
Born again biker and to old to know it!
Thanks for the info.
I'll probably go for a new front end.
First a cuple of things i'd like to get straight in my head.
Does the roll pin that holds the steme in the bottom yoke on my gpz
punch straight through or will i have to drill it out?
And secondly which way does the steme press out
sorry if it sounds stupid i just like to get thing straight before i start buggering things up.
chears Col
I'll probably go for a new front end.
First a cuple of things i'd like to get straight in my head.
Does the roll pin that holds the steme in the bottom yoke on my gpz
punch straight through or will i have to drill it out?
And secondly which way does the steme press out
sorry if it sounds stupid i just like to get thing straight before i start buggering things up.
chears Col
Born again biker and to old to know it!
Who is online
Users browsing this forum: No registered users and 12 guests