Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Fork top nuts

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
KeithZ1R
Moderator
Posts: 3368
Joined: 15th May 2005
Location: Bury

#16 PostAuthor: KeithZ1R » Tue Jan 31, 2017 8:21 am

Z1parR wrote:I haven't read through the list but i think A2 and Z1R are the same forks .


and you would of course be correct :)
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
User avatar
stevecastle
Regular Poster
Posts: 23
Joined: 17th Dec 2016
Location: Bagworth, Leicestershire

#17 PostAuthor: stevecastle » Tue Jan 31, 2017 10:33 am

So, could someone have simply unscrewed the tops and replaced with the nipple type ones or would this not be possible ?
There is air pressure in the forks.
Could it be a case of unscrewing them to see what's in there ?
Steve
1978 z1000a2 Luminous Green
Top
User avatar
000zeds
ZedHead
ZedHead
Posts: 1129
Joined: 30th Dec 2005
Location: Kent

#18 PostAuthor: 000zeds » Tue Jan 31, 2017 5:57 pm

It is possible to simply replace the original ones with the air pipe type,I did it myself many years back and what you need is,

2 X 44029 -1003 Bolts

2 x 11012 - 1017 Rubber Caps

Try Z-Power https://www.z-power.co.uk/merchantmanager/

or http://www.saisei-europe.com/Shop
Zeds-R-Us
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 14 guests