Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

ZRX forks

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
RUDDY
Custard Cream
Custard Cream
Posts: 559
Joined: 26th Oct 2011
Location: CUMBRIA

ZRX forks

#1 PostAuthor: RUDDY » Wed Jun 15, 2016 7:09 pm

Guys, is there a difference between ZRX1100 and ZRX1200 forks ?

I'm sure I read that the earlier forks can be modified, re-valved maybe ? , whereas the later forks cannot.

Are the wheel spindles and fork bottoms the same ?

Cheers
85 Z1100R-1
Top
User avatar
Charlie
Custard Cream
Custard Cream
Posts: 773
Joined: 11th Jun 2011
Location: Sheffield
Contact:
Contact Charlie

#2 PostAuthor: Charlie » Wed Jun 15, 2016 7:19 pm

They will interchange as a complete set, but they are different. As are early (pre 2003) and later ZRX1200 forks
Why do I persist in debating with idiots ? I really should know better :)
Top
weaver
Custard Cream
Custard Cream
Posts: 804
Joined: 15th Nov 2011
Location: merseyside

#3 PostAuthor: weaver » Wed Jun 15, 2016 7:24 pm

yokes are different as well need to be used as a pair top and bottom,think the offset is different 1100 to 1200
Top
User avatar
RUDDY
Custard Cream
Custard Cream
Posts: 559
Joined: 26th Oct 2011
Location: CUMBRIA

#4 PostAuthor: RUDDY » Wed Jun 15, 2016 7:44 pm

Cheers guys, I have a set of 2004 ZRX1200 yokes so I guess if I use them I'll need later type 1200 forks as 1100 ones won't fit ?
85 Z1100R-1
Top
weaver
Custard Cream
Custard Cream
Posts: 804
Joined: 15th Nov 2011
Location: merseyside

#5 PostAuthor: weaver » Thu Jun 16, 2016 6:50 am

forks should fit fine same diameter tubes I would think
Top
User avatar
Charlie
Custard Cream
Custard Cream
Posts: 773
Joined: 11th Jun 2011
Location: Sheffield
Contact:
Contact Charlie

#6 PostAuthor: Charlie » Thu Jun 16, 2016 8:37 am

They all use 43mm stanchions.

K-Tech inners cannot be fitted to post 03 bikes as they are basically sealed cartridge forks. Apparently the bottom of the cartridge is peened over so it cannot be removed

The 12's have built in stone shields as part of the dust cover, the 11's don't.

Fork bottoms are similar and will use the same calipers, mudguards will interchange.

Is it just the legs you want ? I should have a spare set of ZRX1200 (02) fork legs somewhere. I also have some 6 pot Tokico calipers that are fitted as standard. (I have fitted Brembo's on my 12).

If they are of any interest, I will fish 'em out and send you some photos.
Why do I persist in debating with idiots ? I really should know better :)
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 20 guests