standard bore z1a , was running 117.5 main jets , bogsdown ,sooty plugs , needles at #3 , put standard 113's in , kerker 4-1 ,standard airbox ,
113's too lean?
Had the carbs chemically cleaned
Thanks
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
main Jets
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Probably had the larger jets to suit the Kerker, 113 may be too small,with larger jets fiited check out mixture with a Gunsons colurtune/May be worth checking seating of choke plungers,good 12 volts at coils,dropping needle one clip at a time,see if improves sootyness with filter out.try good run and get engine up to temp for a plug chop,dont just run bike on stand plugs wont get to self cleaning temp,if using Ngk plugs replace with nippon denso w24-es..Cheers Paul J
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Who is online
Users browsing this forum: No registered users and 17 guests