Z1-R Clock Mounting Dampers**Solution Now Found + pics**

[pertonpc]

Hi People

Stripped my clock bracket today and the foams were knackered - bit like stale sponge cake but harder to scrape off

I have some foam I am planning to trim to shape - but does anyone know where I can get either of the foams from as a spare part

Listed as item 6 & 9 on this diagram -



part code is 92075-1050 large and 92075-1051 small

Also does anyone have any successful ways of doing this with a Z1-R bracket?

Not sure whether best results will be to stick a strip around top of clock then insert into bracket, or stick a strip round top inner face of bracket and drop the clock into it.

Anyone got any experience or pics of a home made set?

There is one on eBay at the moment - http://www.ebay.co.uk/itm/like/12153218 ... 0&ff14=108


Thanks for looking. From Mark

[ADRIAN H]

One of the larger ones on ebay, a bit pricey

http://www.ebay.co.uk/itm/NOS-Genuine-K ... 1532184356

[ADRIAN H]

You could try Neoprene rubber strips selff adhesive - but would nt know what thickness or width you would need ?

http://www.ebay.co.uk/sch/m.html?_odkw= ... e&_sacat=0

[KeithZ1R]

Talk to Compo Mark

[pertonpc]

Thanks Guys

I will send Compo a message Keith cheers.

p.s. got my forks serviced now - thanks for the oil info

Just waiting for the new paint on the bracket to harden off before I have an attempt at making a foam -

[RGH]

Give Jimbo an Email at Redline, his stock is constantly changing and some times doesn't list the parts he has.

Do you need this bit? Scrowl down.

http://www.redlinecycle.com/Z1-R%20Dash%20Panel.html

[compo z1r]

mark you've a pm

[compo z1r]

clock damper

[pertonpc]

Cheers Neil

One set of those will do perfectly thanks.

You have a pm and some PayPal funds.

Thanks for your trouble.

From Mark

[compo z1r]

Cheers Neil

One set of those will do perfectly thanks.

You have a pm and some PayPal funds.

Thanks for your trouble.

From Mark

NOW COMPLETE mark posting Friday morn

[pertonpc]

Cheers Neil,

Will put some pics up when I get them.

Have checked the meter harness today - all wiring seems fine.

Likewise for the ammeter and fuel gauge fuse unit.

So I can get the clocks rebuilt when your dampers arrive.

[pertonpc]

The new Z1-R silicon meter dampers have arrived now. Many thanks to Compo Z1-R who has made them for me.
They are a perfect fit for the standard bracket and even have a slot for the rolled edge of the bracket to go into. No sticky tape or glue needed :


All these other dampers have to be fitted onto the bracket as well -


Here's what the rebuilt meter bracket looks like now.



I have done a test fitting back onto the bike to make sure I can find and refit all the right fasteners and components. It seems to make more sense now than when it was dismantled - because I have found out what all the pieces do and how they link together.

[KeithZ1R]

Not as shiny but you get the Idea All five now have this system and I have a spare set

[DavidZ1R]

Oh yes put mine on this weekend, just the job