Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Piston Question
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Piston Question
I have a piston which has +2 stamped on the inside, but only an arrow on the crown, is this 1st oversize, and does the cylinders need a rebore to take them, or are they for worn cylinders? ta
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Oversize pistons are stamped on the crown. ART pistons are stamped +.5mm or +.1mm. The barrel must be re-bored to the correct size. You cant just put an oversize piston in a worn bore, most bores wear oval and tapered.
If at first you don't succeed, try and try again. Then quit. There's no point in being a damn fool about it.
W C Fields
W C Fields
Who is online
Users browsing this forum: No registered users and 19 guests