Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Carb holders

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
coldsummer
Hardcore
Hardcore
Posts: 3211
Joined: 29th Jun 2009
Location: Berkeley

Carb holders

#1 PostAuthor: coldsummer » Thu May 29, 2014 6:50 pm

Evening all, I'm just about to refit the carbs to my 650 and I have a new set of holders. Is there any need to use gasket goo around the mating faces or not? I presume not as there is a small raised lip on the face but I wondered if it would be an extra precaution against any air leaks?
Top
User avatar
z1000puddin
Custard Cream
Custard Cream
Posts: 918
Joined: 23rd Jul 2011
Location: Aberdeen,Dyce

#2 PostAuthor: z1000puddin » Thu May 29, 2014 6:56 pm

I do use a small amount of kawabond.
Probably not really required as you say, cause of the recess, but "Belt & Braces"

Stu
Zed til Dead
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#3 PostAuthor: zed1015 » Thu May 29, 2014 6:58 pm

If re-using old rubbers i put a bead of black RTV around the inlet and lightly fit the rubbers.
Wait till the RTV cures overnight then fully tighten the rubbers and peel off the excess RTV.
If using new rubbers I do the above but fully tighten the rubbers on first fitment then just peel off the excess RTV once cured.
Top
User avatar
coldsummer
Hardcore
Hardcore
Posts: 3211
Joined: 29th Jun 2009
Location: Berkeley

#4 PostAuthor: coldsummer » Thu May 29, 2014 7:57 pm

Thanks guys, much appreciated.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 18 guests