Decided to convert from 630 to a 530 Chain & Sprocket set up.
Bike Torque Racing listed a kit suitable for the Z1000 A1-A4, Z1R & Z1000H fuel injection etc.. - all have the front sprocket type 28400 - (18t in my case)
Came to fit the kit today & there is a problem at the front sprocket - the chain is rubbing on the inner Gear Shift Mechanism Cover.
Looking at the front sprockets the original 630 one appears to be offset slightly away from the engine whereas the 530 one doesn't appear to have an offset.
Anyone experienced a similar problem?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Chain & Sprocket kit 530 conversion Z1000 MK2
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Who is online
Users browsing this forum: No registered users and 22 guests