Left handle bar switch internals

[nick sanderson]

Anyone have any photos of the internals of a US left light switch date stamped
2 9
I think my internals may be incorrect as the high / low/ pa are all over the place.
Thanks

[z1000puddin]

Nick,
I have z1000 ltd 1978 left hand switch - Would this be any good ?
Stu

[Z903]

US didn't have the "Pa" on the Z1's, at least not an operating one. They were blanked off with a metal tab.
Euro version here

and another thread here
http://www.z1ownersclub.co.uk/forum/viewtopic.php?t=25342&highlight=

[z1bman]

which type of switch have you got? the usa switch.

this one does not have the pass button

http://www.ebay.com/itm/Kawasaki-Handle ... 3f&vxp=mtr



early type with no pass facility

http://www.ebay.com/itm/Kawasaki-Z1-197 ... 7675.l2557

later type with pass button

http://www.ebay.com/itm/KAWASAKI-Z1-KZ9 ... 1375265837

[nick sanderson]

Mine is a early switch with just the horn button and the pa blanked with a plate
and no brown wire in the switch.
For some reason the wiring all seems ok but I think the switch may have the wrong contact plate or even the contact switch part fitted as they do not seem to line up correctly and the H L Pa light the lights in the wrong order.
I think a may have a bitsa switch.
Would just like to compare with some photo id or does anyone in the club repair switches.

[z1bman]

if the pass switch is not used why don't you just swop over the headlight feed wires at the headlight connector?


i know the contact plate & the headlight switch are different on the european models