Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Ignition switch

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
PETER KZ1A
100Club
100Club
Posts: 159
Joined: 26th May 2009
Location: PERTH WESTERN AUSTRALIA

Ignition switch

#1 PostAuthor: PETER KZ1A » Fri Jan 24, 2014 1:09 pm

Hi all
Just received new ignition switch from Enterprises.Switch is good , however ignition switch holder Kawasaki part # 27019-003 not happening.
Length is 21.5, seems too short by approx 16mm
I bought one of these years ago, all good.Cross referenced,Enterprises only sell 1 switch(40-80600)
Any clues chaps
Thanks
Pierre the dog
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#2 PostAuthor: z1bman » Fri Jan 24, 2014 4:58 pm

it is the correct part they are quite tricky to install its just a matter of working out the correct location for the holder . i cannot remember how i fitted it but i thought the same as you

i think you assemble the holder on to the switch & the push the switch through the clock mounting bracket from underneath ?
Top
User avatar
PETER KZ1A
100Club
100Club
Posts: 159
Joined: 26th May 2009
Location: PERTH WESTERN AUSTRALIA

#3 PostAuthor: PETER KZ1A » Sat Jan 25, 2014 10:46 am

Thanks z1bman
we spent a while on the switch .The "holder" goes over the switch ,that goes into the gauge mount,then the cover goes over the switch.The plastic nut screws onto the switch,securing the whole lot.However this leaves the switch too deep.......
faaaakkk
Then we got on the sauce
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 20 guests