Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Dyna s full advance

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

Dyna s full advance

#1 PostAuthor: PAULJAC47 » Wed Dec 18, 2013 5:26 pm

Guyz sure this has been raised before,my b3 z1000 project came fitted with dyna s ,came to set and will not go to full advance marks,even though i am at the limit in the plate and have moved the half moon pickups as far as they will go,have set these before with no probs,i am setting with a strobe and have marked full advance with tippex just by the number 4,,Any thoughts,,PaulJ
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#2 PostAuthor: zed1015 » Wed Dec 18, 2013 6:07 pm

It's the ROTOR.
It will have '3' or '3A' stamped on it.
Which ever one you have is wrong and you need the other one.
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#3 PostAuthor: PAULJAC47 » Wed Dec 18, 2013 6:19 pm

Thanks Zed are there only two rotor variations? as i have a complete set up that came off a z900...Paul J
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."

-Han Solo



You can't polish a turd, but you can roll it in glitter



Salad is what real food eats.

Anon



PUM 673
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#4 PostAuthor: zed1015 » Wed Dec 18, 2013 6:45 pm

Only two different rotors.
It's because of the advancer.
The early ones were 5 to 40 degrees and the later were 10 to 40 degrees.
Changing the advancer for an early or later one depending on what's fitted will have the same effect as changing the rotor.
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#5 PostAuthor: z1bman » Wed Dec 18, 2013 6:53 pm

z1000b3 uses 211481003
z900a4 uses 21148010
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 13 guests